West System

105 Resin

A specially formulated epoxy resin series, which finds wide use in timber and composite boat construction, and general laminating.

It is commonly used with powder fillers to form high density structural adhesives and low density easily sandable fillers, in this manner offering great versatility. It may be dispensed through our calibrated pump systems. The premium resin for modern timber boat construction.

WEST SYSTEM 105 EPOXY RESIN

The base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built.

Available in 1 Litre, 4 Litre, 10 Litre, 20 Litre and 200 Litre.

Special Hardeners 207 and 209, 3:1 System

WEST SYSTEM 207 SPECIAL COATING HARDENER

This special coating hardener has been specifically developed for coating applications where an exceptional transparent, moisture-resistant, natural wood finish is desired.

The cured epoxy surface will require further UV protection with a quality UV filtering varnish of two pack polyurethane paint. It has been designed to work well in humid conditions. The mix ratio is 3 parts resin to 1 part hardener by volume.

207_3x35L

 

205 and 206 Hardeners, 5:1 System

WEST SYSTEM 205 is used at lower temperatures to produce a rapid cure that develops its physical properties quickly at room temperature.

WEST SYSTEM 205 FAST HARDENER

Available in 200 mL, 800 mL, 2 Litre, 4 Litre and 20 Litre.

WEST SYSTEM 206 SLOW HARDENER

WEST SYSTEM 206 is used for the majority of construction situations, and gives extended working and cure times while still developing it’s physical properties at room temperature.

Available in 200 mL, 800 mL, 2 Litre, 4 Litre and 20 Litre.

Available in 333 ml, 1.33 litre, 3.35 litre, 6.7 litre

WEST SYSTEM 209 EXTRA SLOW HARDENER

For general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately twice the working time of 206 Slow Hardener. 105/209 forms a high-strength, moistureresistant solid with excellent bonding and coating properties. The mix ratio is 3 parts resin to 1 part hardener by volume. Not intended for clear coating.

209_3x35L
Available in 333 ml, 1.33 litre, 3.35 litre, 6.7 litre
Enquiry Cart
Enquiry Cart ×
Loading....
Privacy Statement

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

We collect personal information from you, including information about your:

  • name for customer data management
  • contact information for communications purposes
  • billing or purchase information
  • address information for shipping

We collect your personal information in order to manage and process:

  • sales order
  • sales quotes
  • technical enquiries
  • shipping information

You have the right to ask for a copy of any personal information we hold about you, and to ask for it to be corrected if you think it is wrong. If you’d like to ask for a copy of your information, or to have it corrected, please contact us at dave@adhesivetech.co.nz, or 09 838 6961, or 17 Corban Avenue, Henderson, Auckland, 0612.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.