ADR290 CONCRETE STABILISING RESIN
ADR290 is a low viscosity resin designed to structurally stabilise groundworks in high moisture environments (underground) to give stability to ground level concrete slabs or structures.
Available in 4 Litre, 20 Litre, 200 Litre
ADR320 CONCRETE LAMINATING RESIN
ADR320 is a low viscosity, lightly thixotropic resin designed for the impregnation of structural support fabrics and laminates, for the repair and reinforcement of concrete, masonry and timber structures.
ADR320 has been formulated for the use with ADH26, 28 and 160 Hardeners (see page 11) to cure at room temperature and offers good working times with reasonable overnight hardness at room temperature.
Available in 4 Litre, 20 Litre, 200 Litre
ADR321 CRACK INJECTION AND REPAIR RESIN
ADR321 is a solvent free, low viscosity, rapid curing epoxy resin system specifically formulated for concrete crack repair with ADH321 Hardener. ADR321 is slightly thixotropic to resist resin drainage on vertical surfaces. ADR321 is designed to prime, seal and waterproof cracks and seams.
ADR322 CONCRETE REPAIR MORTAR
ADR322 is a solvent free, grey, rapid curing, highly filled, fine grain epoxy paste system specifically formulated for concrete repair with ADH322 Hardener.
Flooring
ADR327 LIGHT GREY BASE EPOXY RESIN
A concrete flooring epoxy resin, Light Grey Base Epoxy Resin is suitable as a coating resin. It can also be used as a gelcoat resin over top of epoxy laminates.
Available in 7.5 kg, 25 kg
ADR328 LIGHT GREY BASE NON-SKID
A non-skid concrete flooring epoxy resin, Light Grey Base Non-Skid is suitable as a coating resin. It can also be used as a gelcoat resin over top of epoxy laminates.
Available in 15 kg kit
ADR323 THIXOTROPIC ADHESIVE
ADR323 is a thixotropic, epoxy paste adhesive, specifically formulated for the use with ADH323 Hardeners.
The summer hardener is for use in warm applications or where extended work times are required. The winter hardener provides a faster cure for small jobs, or jobs in cold, damp or wet conditions.
ADR323 cures at room and low temperatures to produce high strength waterproof bonds and is suitable for dry and damp cure – and can cure underwater.
ADR247C FORMER BONDING ADHESIVE
ADR247C is a rubber bonding adhesive specifically formulated to bond rubber form liners to steel and wood structures on flat surfaces. This paste is a solvent-free epoxy formulation. Adhesion is even possible in humid but not wet surfaces. Once glued, the removal of the form liner is not possible without breaking.
Available in 4 kg, 20 kg, 200 kg
ADR294 BONDING ADHESIVE
ADR294 is an adhesive with a fast cure for bonding plastic components to concrete and roading. Can be used on a vertical surface, such as reflectors or signage. Comes in a dispensing cartridge.
Available in 900 ml, 10 Litre
ADR310 STUD BONDING RESIN
ADR310 has been developed for the bonding of properly prepared steel studs into a variety of substrates including timber, composite and concrete. This material is low in viscosity and suitable for grouting blind vertical holes with a simple pouring method, or capped horizontal holes with a low-pressure injection process.
Available in 870 ml
TP95 CORROSION RESISTANT COATING
TP95 is a low viscosity epoxy coating system, specifically designed with superior mechanical resistance and chemical resistance – in particular resistance to 98% sulphuric acid. Designed for use with HP95 Hardener.
Available in 20 kg, 200 kg
Sealants / Adhesives
TEROSTAT MS 270
Terostat 270 is a general purpose sealant/adhesive available in black or white. This is a high strength polymer combining the advantages of silicon and urethane without the disadvantages of either. It is ideal for use on multisubstrates, with no need to prime aluminium, steel, stainless steel, brass etc. UV and salt resistant, it is ideal for the bonding and sealing of fittings and windows.
Available in 310 g
TEROSON MS 9399
Terostat 9399 is a 2 part quick curing MS polymer, gels off in 10 minutes! Comes in a 400 ml dual cartridge. Available in black.
Available in 400 ml dual cartridge
TEROSON PU 8519 PRIMER
Terostat 8519 is an all-in-one glass and plastic primer and activator for use prior to windshield bonding. It promotes adhesion and UV-protection of direct glazing adhesives and sealants, and is perfect for application on glass, paint, ceramics and encapsulated screens. Re-activating of existing, cut back direct glazing material is also possible.